wireless components logo pos
Front End Modules QM42500/QM42639 from Qorvo, 2.4 GHz Wi-Fi 7

Front End Modules QM42500/QM42639 from Qorvo, 2.4 GHz Wi-Fi 7

The Qorvo® QM42500and QM42639 are integrated Mobile Wi-Fi front end modules (FEM) designed for Wi-Fi 7 (802.11be) systems. The small form factor and integrated matching minimizes layout area in the application.

Performance is focused on optimizing the PA for a broad range of supply voltage (3.0V < Vcc < 5.0V). The multiple Wi-Fi and BT TX modes enable optimization of output power, linearity, and power dissipation that conserves power consumption while maintaining the highest linear output power and leading edge throughput. Receive path matches the optimal technologies to maximize Rx sensitivity through noise figure performance that is consistent over a wider variety of conditions.

Integrated die level filtering for 2nd and 3rd harmonics as well as 5 GHz rejection for DBDC operation are included. An integrated power coupler enables close loop power control and DPD optimization.

The QM42500 and QM42639 integrate a multi-TX state 2.4 GHz Wi-Fi power amplifier (PA) that is also used for HP BT, single pole four throw switch (SP4T) ANT switch, bypassable low noise amplifier (LNA) with multiple RX states, and power coupler into a single device.


  • Frequency Min(GHz): 2.412
  • Frequency Max(GHz): 2.484
  • Functionality: PA, Switch, LNA
  • Wi-Fi Standards: Wi-Fi 7
  • Vcc(V): 3.85
  • Package Type: Laminate
  • Package(mm)

Typical Applications:

  • Mobile Phones
  • Tablets
  • Computing
  • VR / AR goggles
  • Wi-Fi Routers

Key Features

  • POUT = +16.5 dBm MCS13 HE40 -40 dB Dynamic EVM (TXH)
  • POUT = +17.5 dBm MCS11 HE40SU -38 dB Dynamic EVM (TXH)
  • POUT = +19.0 dBm MCS9 VHT20/40 -38 dB Dynamic EVM (TXH)
  • POUT = +20.5 dBm MCS7 HT40 -31dB Dynamic EVM (TXH)
  • Optimized for a broad range of operating voltages for mobile applications
  • 29 dB Tx Gain (TXH)
  • 1.8 dB Noise Figure
  • 17 dB Rx Gain (High Gain), 16 dB RX Gain (Low Current) & 1.8 dB Bypass Loss
  • Multiple Wi-Fi TX and BT TX states for most efficient operation
  • Integrated Power Coupler

Contact us today for more information.


IMS2024 in Washington D.C

Wireless Components is thrilled to announce the attendance of our Managing Director, Shane, and General Manager, Sean, at IMS2024 – 16-21 June 2024, Washington, DC. Shane

Qorvo’s Multi-time programmable PMICs

Qorvo’s PMICs are efficient and highly integrated solutions that perform power distribution functions in complex systems with multiple power rails. Multiple time programmable (MTP) non-volatile